Dynacell - Dynamic Load Cell ± 2000 N (± 450 lbf)
2527-129 | Dynacell, Dynamic Load Cell. ±2000 N (±450 lbf)
The fatigue life of the unit is 10E9 full stress reversed cycles at the capacity of the cell. Overload capability is 300% of the capacity before mechanical failure of the cell.
Dynacell is a unique load measurement device that automatically compensates for load errors induced through inertia of the load string components. A method
of dynamic inertia compensation is essential for all forms of dynamic testing.
Cell to Machine: 3 off M6 clearance holes on 57.15 PCD
Cell to Accessories: Central M6 x 1 right hand female thread
Overall Dimensions: 40mm high by 75mm diameter.
NOTE: When this Dynacell is mounted to an actuator piston, it is recommended that the maximum grip mass should be below 1000g for dynamic applications.
|Capacité||±2 kN (±450 lbf )|
|Diamètre||75 mm (2.95 in )|
|Hauteur||40 mm (1.6 in )|
|Fixation inférieure||M6x1RH Female|
|Static or Fatigue Rated||Fatigue|
|Upper Fitting||3 x M6 and M6 RH|
|Masse||1 kg (2.2 lb )|
The 2527 Series load cells are designed for use with Dynamic Testing Systems; offering exceptional performance with the ability to measure forces as low as 1/250th of the force capacity to an accuracy of 0.5% of reading. Automatic transducer recognition and electrical calibration, makes them easy to use. The load cells can withstand loads up to 150% of their force capacity without damage and 300% without mechanical failure. All Instron load cells are individually temperature-compensated and tested for accuracy and repeatability on calibration apparatus that is traceable to international standards, with a measurement uncertainty that does not exceed one-third of the permissible error of the load cell.
- 0.6 MB