Compression Test

What is Compression Testing? 

Compression testing is a fundamental type of mechanical testing that is used to determine a material’s behavior under applied crushing loads. Compression tests are typically conducted by applying compressive pressure to a test specimen (usually of either a cuboid or cylindrical geometry) using platens or specialized fixtures on an electromechanical or universal testing machine. During the test, various properties of the material are calculated and plotted as a stress-strain diagram which is used to determine qualities such as elastic limit, proportional limit, yield point, yield strength, and, for some materials, compressive strength.


Compression testing on an Instron


Why Perform a Compression Test?

Compression testing allows manufacturers to assess the integrity and safety of materials, components, and products during several phases of the manufacturing process. The potential applications can vary from strength testing of a car windshield to endurance testing of concrete beams used in construction. Materials that exhibit high tensile strength tend to (but do not always!) exhibit low compressive strength. Likewise, materials high in compressive strength tend to exhibit low tensile strength. Therefore, compression testing is often used on brittle materials such as concrete, metals, plastics, ceramics, composites, and corrugated materials like cardboard. These materials are often used in a load-bearing capacity where their integrity under compressive forces is critical.

compression test stress/strain curve


Ultimate Compressive Strength

The ultimate compressive strength of a material is the value of compressive stress reached when the material fails completely. When brittle materials reach their ultimate compressive strength they are crushed, and the load drops drastically. Materials with higher ductility, (most plastics) do not rupture, but instead continue deforming  until the load is no longer being applied to the specimen, but rather between the two compression platens. In these cases, compressive strength can be reported as specific deformations such as 1%, 5%, or 10% of the test specimen's original height.

Applicable Testing Standards

ASTM D695-15 Compressive Properties of Rigid Plastics

ASTM D575-91 (2012) Method A Rubber Properties in Compression

AITM Airbus Test Method for Determination of Compression Strength After Impact

ASTM C109 Compression Testing 2-Inch Concrete Cubes

ASTM C107 Compressive Strength of Dimension Stone

ASTM D1621-16 Compressive Properties of Rigid Cellular Plastics

ASTM D2844 Resistance R-Value Compacted Soil Stabilometer

ASTM D2844, AASHTO T190, CTM 301, Moisture Exudation Test Compacted Soils

ASTM D3846 In-Plane Shear Strength of Reinforced Plastics

ASTM D575-91 (2012) Method A Rubber Properties in Compression

ASTM F1306 Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates

ASTM F1614 Impulse and Fatigue of Athletic Footwear using Energy Control

ASTM F1717 Testing of Spinal Constructs, Static, Fatigue, Torsion

ASTM F2077 Characterization and Fatigue of Spinal Invertebral Body Fusion Devices

ASTM F2267 Evaluating Spinal Invertebral Body Fusion Devices under Axial Compression

ASTM D7137, JIS K7089, Boeing BSS 7260 Post-Impact Strength of Composite Laminates

EN 50086-2-4 Conduit Systems, Underground Cable Management

EN12430 Point Compression of Thermal Insulation

ISO 14126 In-Plane Compressive Properties of Fiber-Reinforced Plastic Composites

ISO 14879 Knee Testing: Fatigue of Tibial Trays

ISO 604 Compressive Properties of Plastics

ISO 7886-1 Testing Sterile Hypodermic Syringes

ISO 844 Compression Properties of Rigid Cellular Plastics